tlongx.blogg.se - Setup cisco asa 5505 for home

Use CLI Setup mode to configure basic settings (hostname, passwords, clock, etc.).Determine the file system and contents of flash memory.Determine the ASA version, interfaces, and license.Access the ASA console and view hardware, software, and configuration settings.Part 2: Accessing the ASA Console and Using CLI Setup Mode to Configure Basic Settings

Save the basic running configuration for each router and switch.Verify connectivity between hosts, switches, and routers.Configure static routing, including default routes, between R1, R2, and R3.Configure hostnames and interface IP addresses for routers, switches, and PCs.Cable the network as shown in the topology.Part 1: Basic Router/Switch/PC Configuration Note: ISR G2 devices use GigabitEthernet interfaces instead of FastEthernet interfaces. Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Step 3: Configure an ACL to allow access to the DMZ server from the Internet.Ĭhapter 9 Lab A: Configuring ASA Basic Settings and Firewall Using CLI (Instructor Version).Step 2: Configure static NAT to the DMZ server using a network object.Step 1: Configure the DMZ interface VLAN 3 on the ASA.Part 6: Configuring DMZ, Static NAT, and ACLs.Step 3: Configure SSH remote access to the ASA.Step 2: Configure AAA to use the local database for authentication.Step 1: Configure the ASA as a DHCP server.Step 3: Modify the default MPF application inspection global service policy.Step 2: Configure address translation using PAT and network objects.Step 1: Configure a static default route for the ASA.Part 4: Configuring Routing, Address Translation, and Inspection Policy Using the CLI.Step 6: Configure ASDM access to the ASA.Step 4: Configure the inside and outside interfaces.

Step 2: Configure the login and enable mode passwords.

Step 1: Configure the hostname and domain name.

Part 3: Configuring ASA Settings and Interface Security Using the CLI.

Step 6: Use the Setup interactive CLI mode to configure basic settings.

Step 5: Clear the previous ASA configuration settings.

Step 4: Determine the current running configuration.

Step 3: Determine the file system and contents of flash memory.

Step 2: Determine the ASA version, interfaces, and license.

Part 2: Accessing the ASA Console and Using CLI Setup to Configure Basic Settings.

Step 7: Save the basic running configuration for each router and switch.

Step 4: Enable the HTTP server and configure a user account, encrypted passwords, and crypto keys for SSH.

Step 3: Configure static routing on the routers.

Step 2: Configure basic settings for routers and switches.

Step 1: Cable the network and clear previous device settings.

Part 1: Basic Router/Switch/PC Configuration.

Chapter 9 Lab A: Configuring ASA Basic Settings and Firewall Using CLI (Instructor Version).